01 / OVERVIEW
Optical guidance and robot path planning.
M-Track captures the position and orientation of the tool simulator and passes the data to the software for robot path planning. By manually demonstrating the task in the working area, you can prepare the path for subsequent robotic execution.
Capture of position and orientation
Stereo vision tracking captures six degrees of freedom of the tool simulator's movement.
Path from a practical demonstration
The user demonstrates the desired movement with the simulator; the software prepares the path for the robot.
Various robotic tasks
The source lists grinding, coating and welding, as well as support for selected ABB, KUKA, FANUC and EFORT robots.
02 / DEMONSTRATE THE TOOL MOVEMENT
Demonstrate the tool movement
The tool simulator enables movement capture in the actual working area.
03 / FROM TRACKING TO THE ROBOT PATH
From tracking to the robot path
The software uses the captured positions and orientations to prepare the path.
04 / APPLICATIONS
Where to use it.
- Grinding path planning
- Coating and welding path planning
- Verification of positions and robot calibration
05 / GALLERY
The system in practice.
8 images · images by SCANOLOGY. Click to enlarge.
06 / SPECIFICATIONS
Manufacturer data.
Manufacturer table in the original English, with units, operating modes and conditions preserved.
| Type | M-Track Intelligent Robotic Path Planning and Guiding System | |
| Tracking accuracy | 10.4 m³ (Tracking distance 3.5 m) | 0.049 mm (0.0019 in) |
| 28.6 m³ (Tracking distance 5.0 m) | 0.067 mm (0.0026 in) | |
| 49.0 m³ (Tracking distance 6.0 m) | 0.089 mm (0.0035 in) | |
| Robot models supported | ABB/KUKA/FANUC/EFFORT, etc | |
| Tracking frequency | 60 Hz | |
| Tool simulator | Custom | |
| Operating temperature | -10 ℃–40 ℃ | |
Source: official SCANOLOGY product page. Accuracy, volumetric accuracy and resolution apply under the conditions stated by the manufacturer.
DOCUMENTS
For a closer look.
Related products.
All: Tracking systems ↗
3D ING / M-Track
Let’s test the system
on your task.
Describe the object, its size, material and the purpose of the measurement. We will prepare a demonstration or a quote for the right configuration.